DIN Standard 66399 – Paper

6:58 pm artefact_admin

DIN Standard 66399 – Paper

DIN 66399 Material Classification P refers to information presentation in original size, for example paper, films, printing plates. The security levels run from P-1 to P-7 with P-1 being recommended for data carriers with general data, which have to made illegible to P-7 for data carriers with top secret data where the strictest security standards shall be maintained.

If you have questions on how SEM can help, please contact us here, chat with us on the bottom right of this page, or feel free to call us at 800-225-9293 and speak to a real person.

  • Recommended for fast throughput
  • 12mm strips or maximum particle surface area of 2,000mm²
  • Shredded data can be reproduced without special knowledge or equipment, although the process is time-consuming
  • DIN-P2Recommended for basic security
  • 6mm strips or maximum particle surface area of 800mm²
  • Shredded data can be reproduced with equipment, although the process is time-consuming

7050P

  • DIN-P3Recommended for sensitive information
  • 2mm strips or maximum particle surface area of 320mm²
  • Shredded data can only be reproduced with maximum effort and special equipment. Appropriate for sensitive, confidential, and personal data
  • DIN-P4Recommended for commercial (HIPAA, FACTA, FISMA, PIPEDA, etc.)
  • Maximum cross cut particle surface area 160mm² with a maximum strip width of 6mm = 6x25mm
  • Shredded data can only be reproduced utilizing equipment that is not readily available commercially. Appropriate for particularly sensitive, confidential, and personal data
  • DIN-P5Recommended for highly sensitive information
  • Maximum cross cut particle surface area 30mm² with a maximum strip width of 2mm = 2x15mm
  • Shredded data is unlikely to be reproduced even with special equipment. Appropriate for confidential information

1324PSP
2125PSP
2226PSP
2226PSPWO
331PSP

3130PSP
3140PSP
266PSP
5141PSP

  • DIN-P6Recommended for secret/confidential information – Meets US Army Reg. 380-5
  • Maximum cross cut particle surface area 10mm² with a maximum strip width of 1mm = 1x10mm
  • Shredded data cannot be reproduced even with special equipment. Appropriate for highly confidential information demanding increased security precautions

*Available for special order

  • DIN-P7Recommended for NSA requirement for top secret/classified/CUI information
  • Maximum cross cut particle surface area 5mm² with a maximum strip width of 1mm = 1x5mm
  • Shredded data cannot be reproduced in any way with the current state of science and art. Appropriate for classified, top secret, and strictly confidential information demanding the highest security precautions
  • Recommended, for example, for data carriers holding strictly confidential information demanding the highest security precautions
  • 0.8mm x 2.5mm
  • Highest security solution on market today
  • Shredded data cannot be reproduced in any way with the current state of science and art. Appropriate for classified, top secret, and strictly confidential information demanding the highest security precautions

344

*Dependent on screen size.

Note: Machines that qualify for creating particles of a high classification, are also acceptable for all lower classifications. Level 5 PSP Shredders are available for special order.

Explore More